The messages listed in this appendix reside in the file /usr/adm/SYSLOG.
These errors are generated by the Silicon Graphics HLLAPI routines described in Chapter 1, “Silicon Graphics' 3270 HLLAPI.” The messages are divided into two categories: system errors and configuration errors. All system errors should be reported immediately to your SGI service representative. All configuration errors can be eliminated or corrected by changing parameter values in /var/opt/3270/lib/t3279rc.$LOGNAME.
In the error list below, N is the UNIX error number as defined in the intro online man page. The messages are listed below:
If any of these errors occurs, refer to your release notes for product support information.
ERROR: Open of /dev/t3270c0 failed errno = N ERROR: Download ioctl call failed errno = N ERROR: Open of /var/opt/3270/file/exec.info failed errno = N ERROR: Open of /usr/adm/SYSLOG failed errno = N ERROR: Open of /var/opt/3270/file/trace_log failed errno = N ERROR: Open of 3270 configuration file failed errno = N ERROR: Fstat call for /var/opt/3270/lib/t3279uc failed errno = N ERROR: Malloc call failed errno = N ERROR: Mmap call failed errno = N ERROR: Read of /var/opt/3270/lib/t3279uc failed errno = N ERROR: SCR_UD ioctl call failed errno = N ERROR: SET_DID ioctl call failed errno = N |
If a configuration error occurs, see Appendix B in the IRIS 3270 Emulator User's Guide for the valid inputs for each configuration parameter. If changing the inputs does not solve the problem, refer to your release notes for product support information.
ERROR: RECV_TIMEOUT must be between 1000 and 65535 ERROR: SEND_TIMEOUT must be between 1 and 2047 ERROR: KEY_TIMEOUT must be between 1 and 31 ERROR: LINK missing or defined improperly ERROR: CHAR_SET missing or improperly defined ERROR: MODEL must be between 2 and 5 |