- Altix server
- illustration
- System Models
- Altix servers
- monitoring locations
- Monitoring Your Server
- battery statements
- Lithium Battery Statements
- block diagram
- IRU
- System Architecture
- cache coherency
-
Cache Coherency
- circuit breaker switches
- Powering On With Optional System Console and L1/L2 Controller
- CMN number
- CMN Number
- command targeting
- L1 mode
- Command Targeting
- L2 mode
- Setting Command Targeting
- connector pin assignment
- SAS/SATA
- External SAS/SATA Port Connector
- USB type A
- USB Type A Connector
- console
- L1 mode power on
- Powering On and Off from the L1
- powering on bricks
- Powering On and Off at the Console
- console communications
- Console Selection
- subchannels
- Console Selection
- console mode
- from L1 mode
- Console Mode from L1
- from L2 emulator mode
- Console Mode from the L2
- console selection
- Console Selection
- controller
- L1
- Levels of System Control
- customer service
- Product Support
- disk drive installation
- Installing a System Disk Drive
- documentation
- available via the World Wide Web
- Related Publications
- conventions
- Conventions
- embedded support partner (ESP)
- SGI Electronic Support
- system support
- Using Embedded Support Partner (ESP)
- environmental specifications
- Environmental Specifications
- error messages
- L1 Controller Error Messages
- ESP (embedded support partner)
- system support
- Using Embedded Support Partner (ESP)
- failed fan
- Removing and Replacing IRU Fans (Blowers)
- fan numbers for the IRU
- Removing and Replacing IRU Fans (Blowers)
- fan RPM level
- Removing and Replacing IRU Fans (Blowers)
- front panel display
- L1 controller
- L1 Front Panel Display
- front panel LEDs
- L1 Front Panel Controls
- information, warning, and error messages
- viewing in L2 mode
- Viewing Information, Warnings, and Error Messages
- Viewing Information, Warnings, and Error Messages
- install
- disk drive
- Installing a System Disk Drive
- IRU block diagram
- System Architecture
- IRU slot numbering
- Bay (Unit) Numbering
- Knowledgebase
- SGI Electronic Support
- L1
- console mode
- Operating the L1 Controller
- operation mode
- Operating the L1 Controller
- L1 console selection
- L1 Console Selection
- L1 controller
- Monitoring Your Server
- description
- L1 Controller
- error messages
- L1 Controller Error Messages
- front panel display
- L1 Front Panel Display
- front panel display items
- L1 Front Panel Display
- functions
- L1 Controller Functions
- L1 firmware upgrade
- Upgrading L1 Firmware
- L1 mode
- Operating the L1 Controller
- command targeting
- Command Targeting
- from L1 software
- L1 Mode
- from L2 emulation mode
- L1 Mode From L2
- powering on at console
- Powering On and Off from the L1
- to console mode
- Console Mode from L1
- viewing information, warning, and error messages
- Viewing Information, Warnings, and Error Messages
- viewing system configuration
- Viewing System Configuration (from an IRU's Perspective)
- L1 software
- modes of operation
- Operating the L1
- to L1 mode
- L1 Mode
- L2 emulation mode
- to L1 mode
- L1 Mode From L2
- viewing system configuration
- Viewing System Configuration
- L2 emulator mode
- powering off
- Powering On, Powering Off, and Resetting the System From the L2
- powering on
- Powering On, Powering Off, and Resetting the System From the L2
- resetting system
- Powering On, Powering Off, and Resetting the System From the L2
- setting command targeting
- Setting Command Targeting
- to console mode
- Console Mode from the L2
- viewing information, warning, and error messages
- Viewing Information, Warnings, and Error Messages
- laser compliance statements
- Laser Compliance Statements
- LEDs, front panel
- L1 Front Panel Controls
- leveling bolts of a rack
- Positioning and Leveling Racks
- lithium battery warning statements
- Lithium Battery Statements
- Safety Precautions
- lsiutil configuration
- Reconfigure the System Disk Drive(s) for RAID 1
- major components
- System Components
- modes of operation
- L1 software
- Operating the L1
- monitoring
- embedded support partner
- Using Embedded Support Partner (ESP)
- IRUs with L1 controller
- Monitoring Your Server
- server
- Monitoring Your Server
- non-uniform memory access (NUMA)
-
Non-uniform Memory Access (NUMA)
- numbering
- IRUs in a rack
- Bay (Unit) Numbering
- racks
- Rack Numbering
- PCI and PCI-X cards
- installation procedure
- PCI and PCI-X card installation
- Adding or Replacing
PCI/PCI–X Cards
- PCIe slots
- I/O Blade Overview
- physical specifications
- Altix Tall Rack Physical Specifications
- Physical Specifications
- pinouts
- Ethernet connector
- Ethernet Port
- serial connector
- Serial Ports
- power receptacle
- Power Receptacle Verification
- power specifications
- Power Specifications
- powering off
- L2 mode
- Powering On, Powering Off, and Resetting the System From the L2
- powering on
- at system console
- Powering On and Off at the Console
- in L1 mode
- Powering On and Off from the L1
- L2 emulator mode
- Powering On, Powering Off, and Resetting the System From the L2
- preparation
- Preparing to
Power On
- product support
- Product Support
- RAID 1 (disk mirror)
- Reconfigure the System Disk Drive(s) for RAID 1
- RAS features
- Reliability, Availability, and Serviceability (RAS)
- replace a fan
- Removing and Replacing IRU Fans (Blowers)
- resetting system
- L2 mode
- Powering On, Powering Off, and Resetting the System From the L2
- SAS/SATA
- external connector pin assignments
- External SAS/SATA Port Connector
- server
- monitored at L1 controller
- Monitoring Your Server
- monitoring locations
- Monitoring Your Server
- SGI Knowledgebase. See Knowledgebase
- SGI Electronic Support
- Short rack shipping crate removal
- Removing a Short Rack from the Shipping Crate
- site requirements
- Site Plan Verification
- space requirements
- Determining Space Requirements
- subchannels
- associated with console communications
- Console Selection
- support
- embedded support partner (ESP)
- Using Embedded Support Partner (ESP)
- Supportfolio Online
- SGI Electronic Support
- system architecture
- System Architecture
- system components
- Altix 450 server
- System Components
- list of
- System Components
- system controller
- System Control
- system features
- System Features
- system overview
- System Overview
- tall rack
- features
- Altix 42U and 20U Rack Features
- tall rack system weight
- Unpacking and Installing the Tall Rack
- technical specifications
- system level
- System-level Specifications
- technical support
- Product Support
- to monitor IRUs
- Monitoring Your Server
- troubleshooting
- L1 controller error messages
- L1 Controller Error Messages
- problems and recommended actions
- Troubleshooting Chart
- unpack a tall rack
- Unpacking and Installing the Tall Rack
- unpack and move the short rack
- Removing a Short Rack from the Shipping Crate
- upgrading L1 firmware
- Upgrading L1 Firmware
- USB type A
- connector pin assignments
- USB Type A Connector
- VGA video card
- Monitoring Your Server
- viewing system configuration
- L1 mode
- Viewing System Configuration (from an IRU's Perspective)
- voltage select switches for peripherals
- Powering On With Optional System Console and L1/L2 Controller
- warning messages
- viewing in L2 mode
- Viewing Information, Warnings, and Error Messages
- Viewing Information, Warnings, and Error Messages
- weight of the short rack
- Removing a Short Rack from the Shipping Crate