List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. 30-amp Single-phase Power Receptacle for North American Sites

Figure 1-2. 32-amp Single-phase Power Plug for International Sites

Figure 1-3. Dimensions of Tall Rack Shipping Crate

Figure 1-4. Dimensions of Short Rack Shipping Crate

Figure 1-5. Removing a Short Rack from the Shipping Crate

Figure 1-6. Removing a Tall Rack from the Shipping Crate

Figure 1-7. Reattaching the Tall Rack Doors

Figure 1-8. Leveling Bolts

Figure 1-9. Seismic Tie-down Attachment Points

Figure 1-10. IRU Connection Plate for Desktop Systems

Figure 1-11. Mounting Hole Pattern of Rack Rails

Figure 1-12. Installing the Shelf Rails in the Rack

Figure 1-13. Securing the Module to the Front of the Rack

Figure 1-14. NUMAlink Cabling an IRU to an Additional IRU

Figure 1-15. Power-Supply Connectors on the IRU Module

Figure 1-16. Connecting an Unracked IRU System to a Power Source

Figure 1-17. Connecting Multiple Modules to a PDU

Figure 1-18. Optional Three-Phase PDU Example

Figure 1-19. Location of the L1 Console Port

Figure 1-20. PDU Circuit Breakers Example

Figure 1-21. Location of the Power Button

Figure 1-22. L1 Front Panel Functions

Figure 2-1. IRU Power Supply Cable Location Example

Figure 2-2. Single-Phase Rack PDU Circuit Breaker Switches

Figure 2-3. IRU L1 Controller Display Location Example

Figure 2-4. 2D Graphics Card Location in IA2 (base I/O) Blade

Figure 3-1. SGI Altix 450 System (Short Rack)

Figure 3-2. SGI Altix 450 Server System (Tall Rack)

Figure 3-3. Blade, IRU and Rack Components

Figure 3-4. Functional Block Diagram of the Individual Rack Unit (IRU)

Figure 3-5. Blade Node Local Compute/Memory Block Diagram Example

Figure 3-6. Altix 450 IRU System Components Example

Figure 4-1. SGI Altix 450 System Control Network (Example)

Figure 4-2. L1 Front Panel

Figure 4-3. Ethernet Switch System Controller Block Diagram (Example)

Figure 5-1. Tall (42U) Altix Rack and Front Lock

Figure 5-2. Short (20U) Altix Rack (Rear View)

Figure 6-1. Removing the L1 Controller Panel

Figure 6-2. Replacing the L1 Controller Panel

Figure 6-3. Removing an IRU Power Supply

Figure 6-4. Replacing an IRU Power Supply

Figure 6-5. IRU Fan Assembly (Blowers)

Figure 6-6. Removing a Fan From the IRU

Figure 6-7. Replacing an IRU Fan

Figure 6-8. Removing a Compute/Memory Blade From the IRU

Figure 6-9. Replacing a Compute/Memory Blade in the IRU

Figure 6-10. 12-DIMM Board Group Locations Diagram

Figure 6-11. 12-DIMM Board Memory Slot Location Example

Figure 6-12. 8-DIMM Board Group Locations Diagram

Figure 6-13. 8-DIMM Board Memory Slot Location Example

Figure 6-14. DVD Removal from IA Blade

Figure 6-15. DVD Drive Replacement in the IA Blade

Figure 6-16. Comparison of PCI/PCI-X Connector with PCI Express Connectors

Figure 6-17. Removing a Card Carrier From the Three-Slot Blade

Figure 6-18. Extracting the Carrier Metal Filler Plate

Figure 6-19. Adjusting the Carrier Guide Bar

Figure 6-20. Mounting Card in Carrier

Figure 6-21. Mounting Half-height PCI Card into Carrier

Figure 6-22. Moving Carrier Guide Bar to Secure Half-height PCI Card

Figure 6-23. Installing the Bracket to Secure a Half-height PCI Card

Figure 6-24. Installing a Card in a Slot

Figure 6-25. Seating the Card in the Slot

Figure 6-26. Removing the Card Access Panel From the IA Blade

Figure 6-27. Replacing the IA Blade PCI Access Door

Figure 6-28. Location of Disk Drive Bays on IA/IA2 Blade

Figure 6-29. Removing a Disk Drive

Figure 6-30. Replacing a Disk Drive

Figure 7-1. Compute Blade Status LED Locations

Figure 7-2. Full Support Sequence

Figure A-1. Ethernet Port

Figure A-2. Serial Port Connector

Figure A-3. Pin Number Locations for External SAS/SATA Port

Figure A-4. Pin Number Locations for USB Type A Connector

Figure B-1. VCCI Notice (Japan Only)

Figure B-2. Chinese Class A Regulatory Notice

Figure B-3. Korean Class A Regulatory Notice