List of Procedures

| Table of Contents | List of Figures | List of Examples | List of Tables | List of Procedures |

Procedure 2-1. Configuring MFG-installed SGI Altix ICE System

Procedure 2-2. Installing Software on the System Admin Controller

Procedure 2-3. Installing Software on the Rack Leader Controllers and Service Nodes

Procedure 2-4. Discovering Compute Nodes

Procedure 2-5. Service Node Configuration or NAT

Procedure 2-6. Service Node Configuration for Gateway Operation

Procedure 2-7. Service Node Configuration for NFS

Procedure 2-8. Service Node Configuration for NIS with the Compute Nodes Directly Accessing the House NIS Infrastructure

Procedure 2-9. NIS with a Service Node as a NIS Slave Server to the House NIS Master

Procedure 2-10. Partitioning and Creating Filesystems for an NFS Home Server on a Service Node

Procedure 2-11. Service Node NFS Server Alternate: Re-exporting House NFS Servers

Procedure 2-12. Setting Up a Service Node as a NIS master

Procedure 2-13. Setting Up a Service Node a as NIS Client

Procedure 2-14. Setting up a Rack Leader Controller as a NIS Slave Server and Client

Procedure 2-15. Setting up the Compute Nodes to be NIS Clients

Procedure 2-16. Creating User Accounts on a NIS Server

Procedure 3-1. Clone a Compute Node Image

Procedure 3-2. Manually adding a Package to a Compute Node Image

Procedure 3-3. Creating a Simple Compute Node Image Clone

Procedure 3-4. Manually Adding a Package to the Service Node Image

Procedure 3-5. Use mksiimage to Create a Service Node Image

Procedure 3-6. Use mksiimage to Create a Compute Node Image

Procedure 3-7. Copying a Software Image from a Running Service Node

Procedure 3-8. Setting Up a Custom Repository for Site Packages

Procedure 3-9. Using conserver Console Manager

Procedure 3-10. Increasing the /tmp Size

Procedure 3-11. Disabling Swap Space

Procedure 3-12. Increasing Per-node Swap Space

Procedure 3-13. Viewing the Compute Node Read-Write Quotas

Procedure 3-14. Backing up and Restoring the System Database

Procedure 4-1. Using the smconfig Command to Automatically Configure the InfiniBand Fabric

Procedure 4-2. Using the smadmin Command to Administer the InfiniBand Fabric

Procedure 4-3. Troubleshooting the InfiniBand Fabric

Procedure 4-4. Configuring and Initializing the InfiniBand Fabric Manually

Procedure 5-1. Temporarily Take a Node Offline for Maintenance

Procedure 5-2. Permanently Replace a Failed Blade

Procedure 5-3. Permanently Remove a Blade

Procedure 5-4. Add a New Blade