List of Figures

| Table of Contents | List of Figures | List of Examples | List of Tables | List of Procedures |

Figure 1-1. Basic System Building Blocks

Figure 1-2. Chassis Manager Cabling

Figure 1-3. Service Nodes

Figure 1-4. Network Connections In a System With Two IRUs

Figure 1-5. Chassis Manager

Figure 1-6. VLAN_GBE and VLAN_BMC Network Connections - IRU View

Figure 1-7. VLAN_GBE and VLAN_BMC Network Connections - Rack View

Figure 1-8. VLAN_HEAD Network Connections

Figure 1-9. Two InfiniBand Fabrics in a System with Two IRUs

Figure 2-1. System Admin Controller Power On Button and DVD Drive

Figure 2-2. YaST Welcome Screen

Figure 2-3.  -> Hostname and Domain Name Configuration Screen

Figure 2-4. Network Card Configuration Interfaces Screen

Figure 2-5. Network Card Configuration Overview Screen

Figure 2-6. Network Address Setup Screen

Figure 2-7. Hostname and Name Server Configuration Screen

Figure 2-8. Installation Competed Screen

Figure 2-9. YaST2 - firstboot@Linux Welcome Screen

Figure 2-10. Hostname and Domain Name Screen

Figure 2-11. Network Configuration II Screen

Figure 2-12. Network Settings Screen

Figure 2-13. Network Card Setup Screen

Figure 2-14. Network Settings Screen

Figure 2-15. Network Settings Routing Screen

Figure 2-16. Cluster Configuration Tool: Initial Configuration Check Screen

Figure 2-17. Cluster Configuration Tool: Initial Cluster Setup Screen

Figure 2-18. Initial Cluster Setup Tasks Screen

Figure 2-19. Cluster Configuration Tool: Repo Manager Screen One

Figure 2-20. Cluster Configuration Tool: Repo Manager Screen Two

Figure 2-21. Cluster Configuration Tool: Repo Manager Screen Three

Figure 2-22. Cluster Configuration Tool: Repo Manager Screen Four

Figure 2-23. Cluster Configuration Tool: Repo Manager: Add Media Screen Four

Figure 2-24. Cluster Network Setup Screen

Figure 2-25. Update Subnet Address Warning Screen

Figure 2-26. Update Subnet Addresses Screen

Figure 2-27. Update Cluster Domain Name Screen

Figure 2-28. NTP Time Server/Client Setup Screen

Figure 2-29. Advance NTP Configuration Screen

Figure 2-30. New Synchronization Screen

Figure 2-31. NTP Server Screen

Figure 2-32. NTP Time Server/ Client Setup Screen Three

Figure 2-33. Admin Infrastructure One Time Setup Screen One

Figure 2-34. Configure House DNS Resolvers Screen

Figure 2-35. Setting DNS Forwarding Screen

Figure 2-36. Cluster Configuration Tool: Admin Infrastructure One Time Setup Screen

Figure 2-37. Configure InfiniBand Fabric from Cluster Configuration Tool

Figure 2-38. InfiniBand Management Tool Screen

Figure 2-39. Administer InfiniBand GUI

Figure 4-1. InfiniBand Management Tool Screen

Figure 4-2. Configure Topology Screen

Figure 4-3. Administer InfiniBand Tool Screen

Figure 4-4. Administer InfiniBand Status Option

Figure 4-5. Two InfiniBand Fabrics in a System with Two IRUs

Figure 4-6. opensm Software Failover

Figure 5-1. Admin/RLC Server Front Panel Controls and Indicator LEDs

Figure 5-2. Admin/Leader to CMC Cable Examples

Figure 5-3. Admin/Leader Server Front Features and Rear Connector Locations

Figure 5-4. Ganglia System Monitor

Figure 5-5. Ganglia System Monitoring Node View

Figure 5-6. pmie- Cluster Performance Monitor