List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. System Management Node Rear Connections

Figure 1-2. UV CMC Connections

Figure 1-3. IRU Power Supply Cable Location Example

Figure 1-4. Single-Phase 2-Outlet PDU Example

Figure 1-5. Single-Phase 8-Outlet PDU

Figure 1-6. Three-Phase PDU Examples

Figure 2-1. System Management Node Front and Rear Panels

Figure 2-2. SGI Altix UV 1000 LAN-attached System Control Network

Figure 2-3. Optional 1U Rackmount Console

Figure 2-4. System Management Node (SMN) Direct Video Connection Ports

Figure 3-1. SGI Altix UV 1000 System Example

Figure 3-2. SGI Altix UV 1000 IRU and Rack

Figure 3-3. Functional Block Diagram of the Individual Rack Unit

Figure 3-4. Blade Node Block Diagram

Figure 3-5. Altix UV 1000 IRU System Components Example

Figure 3-6. BaseIO Riser Enabled Blade Front Panel Example

Figure 4-1. Altix UV 1000 Series Rack Example

Figure 4-2. Front Lock on Tall (42U) Altix Rack

Figure 4-3. Optional Water-Chilled Cooling Units on Rear of Altix Rack

Figure 5-1. Comparison of PCI/PCI-X Connector with PCI Express Connectors

Figure 5-2. The PCIe Expansion Enclosure

Figure 5-3. Card Slot Locations

Figure 5-4. Removing a PCIe Enabled Riser Blade

Figure 5-5. PCIe Card Access in Riser Blade

Figure 5-6. Install/Replace a New PCIe Card in the Riser Blace

Figure 5-7. Replace the Blade After PCIe Installation

Figure 5-8. Location of Disk Drive Bays

Figure 5-9. Removing/Replacing a Disk Drive

Figure 6-1. UV Compute Blade Status LED Locations

Figure 6-2. Full Support Sequence Example

Figure A-1. Ethernet Port

Figure A-2. Serial Port Connector

Figure A-3. Pin Number Locations for USB Type A Connector

Figure B-1. VCCI Notice (Japan Only)

Figure B-2. Korean Class A Regulatory Notice