PDP-11/40,-11/35 (21 inch chassis) System Manual

Company:Digital Equipment Corporation
Part:EK-11040-TM-002
Date:1975-01
Keywords:PDP-11/35

Table of Contents

  • Chapter 1 Introduction
    • 1.1 Scope
    • 1.2 System Components
    • 1.3 Functional Description
      • 1.3.1 Unibus
      • 1.3.2 KD11-A Processor
      • 1.3.3 KY11-D Programmer's Console
      • 1.3.4 KF11-L Core Memory
      • 1.3.5 Optional Memory Systems
        • 1.3.5.1 PDP-11/40 Memories
        • 1.3.5.2 PDP-11/20 Memories
        • 1.3.5.3 MF11-U/UP Core Memory
      • 1.3.6 LA30 DECwriter
      • 1.3.7 DL11 Asynchronous Line Interface
      • 1.3.8 Power System
    • 1.4 Applicable Documentation
    • 1.5 Engineering Drawings
  • Chapter 2 Installation
    • 2.1 Scope
    • 2.2 Site Preparation
      • 2.2.1 Physical Dimensions
      • 2.2.2 Fire and Safety Precautions
      • 2.2.3 Environmental Requirements
        • 2.2.3.1 Humidity and Temperature
        • 2.2.3.2 Air Conditioning
        • 2.2.3.3 Acoustical Damping
        • 2.2.3.4 Lighting
        • 2.2.3.5 Special Mounting Conditions
        • 2.2.3.6 Static Electricity
      • 2.2.4 Electrical Requirements
    • 2.3 Installation Procedures
      • 2.3.1 Unpacking
      • 2.3.2 Inspection
      • 2.3.3 Cabinet Installation
      • 2.3.4 AC Power Connections
      • 2.3.5 Intercabinet Connections
        • 2.3.5.1 Unibus Connections
        • 2.3.5.2 Remote Power Connections
        • 2.3.5.3 Ground Strapping
      • 2.3.6 Remote Peripheral Interconnection
      • 2.3.7 Installation Verification
      • 2.3.8 Initial Power Turn-on
    • 2.4 Initial Operation and Programming
    • 2.5 Customer Acceptance
  • Chapter 3 System Operation
    • 3.1 Scope
    • 3.2 KY11-D Programmer's Console
    • 3.3 DECwriter
    • 3.4 Teletype
    • 3.5 Basic Operation
      • 3.5.1 Power On
      • 3.5.2 Basic Console Control
        • 3.5.2.1 ENABLE/HALT Switch
        • 3.5.2.2 Loading Data Manually
      • 3.5.3 Manual Program Loading (Bootstrap Loader)
      • 3.5.4 Automatic Program Loading
        • 3.5.4.1 Loading Absolute Loader
        • 3.5.4.2 Loading Maintenance Loader
      • 3.5.5 Running Programs
    • 3.6 Basic Progamming
  • Chapter 4 Processor Instructions and Options
    • 4.1 Scope
    • 4.2 Instruction Set
      • 4.2.1 Address Modes
      • 4.2.2 Basic Instruction Set
      • 4.2.3 Extended Instruction Set
    • 4.3 Processor Options
      • 4.3.1 KE11-E Extended Instruction Set (EIS) Option
      • 4.3.2 KE11-F Floating Instruction Set (FIS) Option
      • 4.3.3 KJ11-A Stack Limit Register Option
      • 4.3.4 KT11-D Memory Management Option
      • 4.3.5 KW11-L Line Time Clock Option
      • 4.3.6 KM11-A Maintenance Console Option
      • 4.3.7 Small Peripheral Controller
  • Chapter 5 System Peripherals and Options
    • 5.1 Scope
    • 5.2 Peripherals and Options
  • Chapter 6 Equipment Mounting and Power
    • 6.1 Scope
    • 6.2 System Mounting Box
      • 6.2.1 Processor Module Allocations
      • 6.2.2 Memory Module Allocations
      • 6.2.3 Programmer's Console Mounting
    • 6.3 Cabinet and System Mounting
      • 6.3.1 System Cabinet
      • 6.3.2 System Configuration
    • 6.4 Power System
      • 6.4.1 861 Power Controller
      • 6.4.2 H742 Power Supply
        • 6.4.2.1 H742 +15V Output
        • 6.4.2.2 H742 Clock Output
        • 6.4.2.3 AC LO and DC LO Circuits
      • 6.4.3 H744 +5V Regulator
        • 6.4.3.1 H744 Regulator Circuit
        • 6.4.3.2 H744 Overcurrent Sensing Circuit
        • 6.4.3.3 H744 Overvoltage Crowbar Circuit
      • 6.4.4 H745 -15V Regulator
        • 6.4.4.1 H745 Regulator Circuit
        • 6.4.4.2 H745 Overcurrent Sensing Circuit
        • 6.4.4.3 H745 Overvoltage Crowbar Circuit
        • 6.4.4a H754 +20, -5V Regulator
      • 6.4.5 861 Power Controller Interconnection
      • 6.4.6 Power System Cable Harness
      • 6.4.7 DC Power Distribution
        • 6.4.7.1 Early Power Distribution Systems
        • 6.4.7.2 Newer Power Distribution Systems
  • Chapter 7 General Maintenance
    • 7.1 Scope
    • 7.2 Overall Maintenance Techniques
      • 7.2.1 Knowledge of Proper Hardware Operation
      • 7.2.2 Detection and Isolation of Error Conditions
      • 7.2.3 Means of Repairing Error Conditions
      • 7.2.4 Digital Field Service
    • 7.3 Maintenance Equipment Required
    • 7.4 Preventive Maintenance
      • 7.4.1 Physical Checks
      • 7.4.2 Electrical Checks and Adjustments
        • 7.4.2.1 Processor Clock Adjustment Check
        • 7.4.2.2 Voltage Regulator Checks
        • 7.4.2.3 861 Power Controller
        • 7.4.2.4 AC Power Controller Receptacles
      • 7.4.3 ASR 33 Teletype
        • 7.4.3.1 Preventive Maintenance Checks
        • 7.4.3.2 Lubrication
      • 7.4.4 LA30 DECwriter Preventive Maintenance
      • 7.4.5 PC05 High-Speed Paper-Tape Read/Punch Option
        • 7.4.5.1 Mechanical Checks
        • 7.4.5.2 Electrical Checks
    • 7.5 Diagnostic Programs
      • 7.5.1 General Description
      • 7.5.2 Diagnostic Program Utilization
    • 7.6 Use of Module Extenders
    • 7.7 PDP-11/40 Power System Maintenance
      • 7.7.1 Visual Inspection
      • 7.7.2 Power System Checks
  • Appendix A Summary of Equipment Specifications

Copies

Address: http://bitsavers.org/pdf/dec/pdp11/1140/1140_SystemManual.pdf
Site: Al Kossow's Bitsavers
Format: PDF
Size: 8445900 bytes (8.1 MiB)
MD5: 87c2a37b94d757351a771db9a1368f25
Mirrors: