PDP-11/05-S, 11/10-S System Manual

Company:Digital Equipment Corporation
Part:DEC-11-H05SS-B-D
Date:1975-01
Keywords:PDP-11

Table of Contents

  • Chapter 1 Introduction
    • 1.1 Scope
    • 1.2 System Components
      • 1.2.1 BA11-K Mounting Box
      • 1.2.2 Backplane
      • 1.2.3 KD11-B Processor
      • 1.2.4 KY11-J Programmer's Console
      • 1.2.5 MM11-U Core Memory System
      • 1.2.6 Unibus
    • 1.3 Reference Documents
    • 1.4 Reference Drawings
  • Chapter 2 Installation
    • 2.1 Scope
    • 2.2 Environmental Requirements
      • 2.2.1 Humidity and Temperature
      • 2.2.2 Air Conditioning
      • 2.2.3 Special Mounting Conditions
      • 2.2.4 Static Electricity
    • 2.3 Electrical Requirements
    • 2.4 Installation Procedures
      • 2.4.1 Unpacking
      • 2.4.2 Inspection
      • 2.4.3 Cabinet and Slide Mounting Specifications
      • 2.4.4 Installation of LA36 DECwriter as an SCL Device
      • 2.4.5 Initial Power Turn-On
    • 2.5 Installation Certification
  • Chapter 3 System Operation
    • 3.1 Scope
    • 3.2 KY11-J Programmer's Console
      • 3.2.1 Console Power Key Switch
      • 3.2.2 Function Switches
      • 3.2.3 ADDRESS/DATA Switches
      • 3.2.4 Console Indicators
    • 3.3 Console Operation
      • 3.3.1 Load Address Switch
      • 3.3.2 Examine Switch
      • 3.3.3 Deposit Switch
      • 3.3.4 ENABLE/HALT Switch
      • 3.3.5 START Switch
      • 3.3.6 Continue Switch
    • 3.4 Unconditional Computer and Unibus Initialization
    • 3.5 Basic Operation
      • 3.5.1 Power On
      • 3.5.2 Basic Console Control
        • 3.5.2.1 ENABLE/HALT Switch
        • 3.5.2.2 Loading Data Manually
      • 3.5.3 Manual Program Loading (Bootstrap Loader)
      • 3.5.4 Automatic Program Loading
      • 3.5.5 Memory Dumps
        • 3.5.5.1 Operating Procedures
        • 3.5.5.2 Output Formats
        • 3.5.5.3 Storage Maps
      • 3.5.6 Running Programs
    • 3.6 Basic Programming
  • Chapter 4 Instruction Set
    • 4.1 Scope
    • 4.2 Addressing Modes
      • 4.2.1 Introduction
      • 4.2.2 Instruction Timing
    • 4.3 PDP-11/05/10-S Instructions
    • 4.4 Instruction Set Differences
  • Chapter 5 Power System
    • 5.1 Scope
    • 5.2 H765 Power Supply
    • 5.3 Power System
      • 5.3.1 Power Flow
    • 5.4 Voltage Regulator Output Specifications
  • Chapter 6 System Expansion
    • 6.1 Scope
    • 6.2 Types of System Expansion
    • 6.3 SPC Installation
    • 6.4 System Unit (SU) Installation
    • 6.5 Expansion Box Installation
  • Chapter 7 General Maintenance
    • 7.1 Scope
    • 7.2 Maintenance Philosophy
      • 7.2.1 Knowledge of Hardware Operation
      • 7.2.2 Detection and Isolation of Error Conditions
      • 7.2.3 Means of Repairing Error Conditions
    • 7.3 Maintenance Equipment Required
    • 7.4 Preventive Maintenance
      • 7.4.1 Physical Checks
      • 7.4.2 Electrical Checks and Adjustments
        • 7.4.2.1 DC Voltage Checks
        • 7.4.2.2 Processor Clock Adjustment Check
        • 7.4.2.3 SCL Clock Adjustment Check
    • 7.5 Troubleshooting Procedures
      • 7.5.1 Initial Investigation
      • 7.5.2 Preliminary Check
      • 7.5.3 Run System Diagnostics
      • 7.5.4 Run Device Diagnostics
    • 7.6 Diagnostic Programs
      • 7.6.1 General Description
    • 7.7 KM11 Maintenance Modules
      • 7.7.1 Use of the KM11 Maintenance Modules
    • 7.8 Use of Module Extenders
  • Appendix A Cable Connectors
    • A.1 Introduction
    • A.2 Serial Communications Line Interface
    • A.3 Console Cable
    • A.4 Unibus Cable/Jumper

Copies

Address: http://manx-docs.org/collections/hcps/h05ssbd.pdf
Site: hcps collection
Format: PDF
Size: 51667584 bytes (49.3 MiB)
MD5: 2b81ef3b7d251a70e6f2ca9041148ae8