VAXstation II/GPX Owner's Manual, BA123 Enclosure

Company:Digital Equipment Corporation
Part:EK-105AA-OW-001
Date:1987-02
Keywords:

Table of Contents

  • Part I Base System Installation
  • Chapter 1 Preparing for Installation
    • Check Your Shipment
    • Site-Preparation Review
      • Space Planning
        • The System Unit
        • The Color Monitor
      • Electrical Requirements
      • Environment
        • Temperature and Humidity
        • Static Electricity
        • Clean Area
        • Supplies Storage
  • Chapter 2 Setting Up the Hardware
    • Setting Up the Color Monitor
    • Setting Up the Keyboard and Pointing Device
    • Connecting the VAXstation II/GPX to a Power Source
    • Connecting the VAXstation II/GPX to a Network
      • Connecting the Ethernet Transceiver Cable to the Workstation
      • Connecting to Standard Ethernet
      • Connecting to ThinWire Ethernet Using the DESTA
    • Testing the VAXstation II/GPX
  • Part II Operation
  • Chapter 3 VAXstation II/GPX Hardware
    • VAXstation II/GPX Controls and Indicators
      • Halt Enable/Disable Switch (2-position toggle switch)
      • Power-Up Mode Selection (3-position rotary switch)
      • Baud Rate Selection Switch (8-position rotary switch)
      • Light-Emitting Diode (LED) Display
      • Printer Port
      • The System Power Switch
      • The Restart/Run Pushbutton
      • The DC OK Indicator
      • The Halt Pushbutton
      • The Fixed Disk Pushbuttons
    • Turning On the System
      • Initial Control Panel Switch Settings
    • Turning Off the System
    • Color Monitor Controls and Indicators
    • Fixed Disk Drive
    • Tape Drive
      • Inserting a Tape Cartridge
      • Rewinding and Unloading a Tape Cartridge
      • Protecting Tape Cartridges from Accidental Overwriting
      • Handling and Storing Tape Cartridges
    • Dual Diskette Drive
      • Inserting a Diskette
      • Protecting Diskettes from Accidental Overwriting
      • Handling and Storing Diskettes
    • Back-up Copies
  • Part III Options
  • Chapter 4 Options
    • Hard-Copy Output Devices
      • Printers
        • The LN03
        • The LN03 PLUS
        • The PrintServer 40 (LPS40)
        • The LA210
        • The LA75
        • The LA50
        • The LCG01
      • Plotter
        • The LVP16
      • Printer and Plotter Connection to the System
    • Input Devices
      • The Tablet
      • The Mouse
    • Memory
      • The Memory Modules
    • Video
      • The Video Subsystem
    • Storage Devices
      • The Fixed Disk Drives
      • The Tape Drive
      • The Dual Diskette Drive
    • Communications
      • The Ethernet Communication Modules
      • ThinWire Ethernet Components
        • ThinWire Ethernet Cable
        • Connectors
        • Barrel Connectors and T-Connectors
        • DESTA and Transceiver Cable
        • Terminators
      • Connectors and Terminators
      • Additional Equipment
        • DIGITAL ThinWire Ethernet Station Adapter (DESTA)
      • Modems
        • DF224
        • DF124
        • DF112
        • DF03
      • The DZQ11 Asynchronous Multiplexer
      • The DHV11 Asynchronous Multiplexer
      • The DMV11 Synchronous Line Controller
      • The DPV11 Synchronous Line Controller
      • The KMV11 Programmable Controller
  • Part IV Troubleshooting
  • Chapter 5 Troubleshooting Procedure
    • Power-up Messages
    • Basic Troubleshooting
      • Replacing the Fuse
        • Color Monitor
      • Mouse Maintenance
    • MicroVAX Diagnostic Monitor
      • The MicroVAX Diagnostic Monitor Main Menu
      • The System Utilities Menu
  • Chapter 6 Service
    • How to Call for Service
    • DIGITAL Services
  • Part V Appendixes
  • Appendix A VAXstation II/GPX System Specifications
  • Appendix B VAXstation II/GPX Related Documents
    • Hardware
    • ULTRIX Software
    • MicroVMS Software
  • Part VI Glossary
  • Glossary

Copies

Address: http://manx-docs.org/collections/antonio/dec/105aaow1.pdf
Site: Antonio Carlini's Scans
Format: PDF
Size: 37052088 bytes (35.3 MiB)
MD5: 231a55a5bab0592386c66164a5ddaf97